Head Hood compressed air line system

1 sku

Head Hood compressed air line system

Technical parameters

1. Type: long tube respirator.
2. The head cover material: DuPont Tyvek ®, PETG lens.
3. Air breathing tube material: inner layer polyurethane, reinforced polyester yarn knitting, outer black polyvinyl chloride.
4. Air pump material: metal base and shell, brass and electroplated steel pipe, brass pressure reducing valve, steel handle, blue powder coating.

Executive standard

NIOSH

Supply capability

Brand : KANGSHIELD

Guarantee period : Note: 1.Before using long tube air breathing apparatus, you should check whether the catheter and the mask are leaking. There is no foreign body in the pipe. 2. Attention should be paid to the air inlet to be placed in a non-pollution and non-toxic environment, and the special person should be seen to prevent the breathing difficulties caused by the pressure of the airway and the discount.The trachea should not be too long, because the air duct is too long and it can be very stressful, causing breathing difficulties and so on.If you need to move the long tube air breathing apparatus in the process of construction, be careful not to pull the gas supply line. 3. The respirator should be properly protect long tube long tube on mobile gas source, avoid gas long tube contact with sharp, sharp Angle, corrosive medium or drag with coarse material produce friction, prevent puncture, scratch, scratch gas supply pipe.In case of contact with corrosive medium, clean water should be cleaned and dried immediately, such as damaged or damaged, should be replaced immediately. Guarantee period: 10 years.

Enquiry Now
Flammable gas detector

1 sku

Flammable gas detector

Technical parameters

Gas detection: LNG, LPG.
Sampling method: built-in sampling pump with flow rate of 0.5 litres/min.
Sensor type: catalytic combustion.
Test range: 0 ~ 100% LEL.
Response time: 5 seconds.
Accuracy: 50 PPM.
Display: digital LCD.
Alarm: buzzer alarm and LCD display.
Gas concentration:
0 ~ 1% LEL - electronic column.
1 ~ 100% LEL - digital display.
Explosion-proof class:
Sensor: Ex d IIC T6.
Detector: Ex ia IIC T4.
Power supply: alkaline battery or rechargeable battery pack.
Operating temperature: - 20 ℃ ~ + 50 ℃.
Duration: more than 12 hours.
Size: 55 mm (W) x241mm x33mm (H) (D)
Weight: 260g.
Options: external probe and charging adapter.

Executive standard

Supply capability

Brand : KANGSHIELD

Guarantee period : Storage instructions: 1. After using the instrument, make sure that the instrument has enough power, or put the amount of power in the underpressure and fill it up. Do not store the instrument when the battery is exhausted, so as not to damage the battery. 2. Keep the equipment in plastic bags or special boxes to keep the environment clean, dry and ventilated, and avoid dust accumulation or dampness. 3. Store the environment 0-40 degrees, away from high temperature and direct sunlight, so as not to damage the instrument or reduce the sensitivity. 4. Should be stored in the environment without corrosive gas, hydrogen sulfide and silicon vapor, avoiding instrument corrosion or poisoning. Instructions: 1. Pay attention to regular calibration and testing. 2. Note the detection interference between various sensors. 3. Pay attention to the life of various sensors. 4. Pay attention to the measuring range of the instrument. Guarantee period: 3 years.

Enquiry Now
Bracket

1 sku

Bracket

Technical parameters

1. Support material: aluminum.
2. Rack material: ABS.

Executive standard

ANSI CE

Supply capability

Brand : KANGSHIELD

Guarantee period : It should not be stored in: acid, alkali, heat, sun, humidity, etc. , not to be put together with hard objects. Warranty period: 2 years.

Enquiry Now
Auto-darkening welding mask

1 sku

Auto-darkening welding mask

Technical parameters

1. Material:
Polycarbonate material, LCD liquid crystal display filter.
2. Color: blue.
3. Filter color:
Light color-4.
Dark degrees-9 to 13 adjustable.
4. Switching speed-no less than 0. 000033 seconds (from light to dark).
5. switching time- less than 0. 1 to 1 second.

Executive standard

ANSI CE

Supply capability

Brand : KANGSHIELD

Guarantee period : Storage instructions: Place the face screen in the original packaging and place it in a clean and dry place. Warranty period: 2 years.

Enquiry Now
Auto-darkening welding mask

1 sku

Auto-darkening welding mask

Technical parameters

1. Material:
Polycarbonate material, LCD liquid crystal display filter.
2. Color: blue
3. Filter color:
Light color-4
Dark degrees-9 to 13 adjustable.
4. Switching speed-no less than 0. 000033 seconds (from light to dark).
5. switching time- less than 0. 1 to 1 second.

Executive standard

ANSI CE CSA

Supply capability

Brand : KANGSHIELD

Guarantee period : Storage instructions: Place the face screen in the original packaging and place it in a clean and dry place Warranty period: 2 years.

Enquiry Now
Single filter full face mask

2 sku

Single filter full face mask

Technical parameters

1.Face mask pattern: head-mounted.
2.Body material: rubber/plastic.
3.Screen material: polycarbonate.

Executive standard

CE EN140

Supply capability

Brand : KANGSHIELD

Guarantee period : Storage instructions: In storage, the location of high temperature, bright sunlight and hot radiation can not be approached to prevent the silica gel from being dissolved, corrupted and cracked. Keep the room temperature in the cold winter season in case the mask is hard. It is not easy to open the encapsulated plastic membrane to prevent the impact of service life. Shelf life: 3 years.

Enquiry Now
Visor

1 sku

Visor

Technical parameters

1. Panel material: PC.
2. Edge material: aluminum.

Executive standard

ANSI CE

Supply capability

Brand : KANGSHIELD

Guarantee period : Storage: store in a cool, dry place to avoid moisture. Warranty period: 2 years.

Enquiry Now
Compressed air respirator

1 sku

Compressed air respirator

Technical parameters

1. Mask material: polycarbonate.
2. Air cylinder material: aluminum inner carbon fiber with full twining compound cylinder.
3. Shoulder material: flame retardant polyester fabric.
4. Back to material: carbon fiber composite material injection molding.

Executive standard

Supply capability

Brand : KANGSHIELD

Guarantee period : Note: 1. Special bottles shall not change the seal and color marks of the cylinders without authorization. 2. When the cylinder is used, it should be placed normally.It shall not be near the heat source, and in the area of 10m around the cylinder, there should be no fire or spark explosion. 3. The gas cylinders used in the summer, should prevent sun, rain and flooding, maintenance of cylinders in air respirator, pay attention to the detection of cylinder valves and ensure the bottle sealed with no leakage and cylinder valves and pressure reducer interface tighten. 4. Operate the valve door with hands, gloves, tools, pressure reducers, cylinder valves and other grease. 5. Open or close the cylinder valve, can only slowly by hand or special wrench, hammer and tongs, long handle screw spanner are not allowed to be used, to prevent damage to valve parts or fuck too hard of friction heat and electrostatic sparks. 6. The stenciling marks of cylinders include the manufacture of steel marks and inspection of seal marks, which are the basis for identification of gas cylinders.The manufacturing steel mark is the original mark of the cylinder, which is printed by the manufacturing unit on the shoulder, cylinder and cap of the cylinder. 7. Inspection of the steel seal is conducted on a regular basis and the inspection unit is printed on the cylinder.In the inspection of the stenciling marks, the color marks shall also be applied in accordance with the year. 8. The main purpose of the cylinder spraying color tag is easy to distinguish the dielectric cylinders, which can be very clearly from the appearance of the color quickly identify all gas cylinders, avoid wrong or misuse. 9. Air ventilator cylinder inner gas should not be used up as much as possible.Formulate the corresponding management system and safety operating procedures according to the usage situation, and conduct professional training and technical assessment for the use personnel. Guarantee period: 10 years.

Enquiry Now
Double filter full face mask

2 sku

Double filter full face mask

Technical parameters

1.Face mask pattern: head-mounted.
2.Body material: rubber/plastic.
3.Screen material: polycarbonate.

Executive standard

CE EN140

Supply capability

Brand : KANGSHIELD

Guarantee period : Storage instructions: In storage, the location of high temperature, bright sunlight and hot radiation can not be approached to prevent the silica gel from being dissolved, corrupted and cracked. Keep the room temperature in the cold winter season in case the mask is hard. It is not easy to open the encapsulated plastic membrane to prevent the impact of service life. Shelf life: 3 years.

Enquiry Now
Full mask compressed air line system

1 sku

Full mask compressed air line system

Technical parameters

1. Type: long tube respirator.
2. Mask material: silica gel + PC face screen.
3. Air breathing tube material: inner layer polyurethane, reinforced polyester yarn knitting, outer black polyvinyl chloride.
4. Air pump material: metal base and shell, brass and electroplated steel pipe, brass pressure reducing valve, steel handle, blue powder coating.

Executive standard

NIOSH

Supply capability

Brand : KANGSHIELD

Guarantee period : Note: 1.Before using long tube air breathing apparatus, you should check whether the catheter and the mask are leaking. There is no foreign body in the pipe. 2. Attention should be paid to the air inlet to be placed in a non-pollution and non-toxic environment, and the special person should be seen to prevent the breathing difficulties caused by the pressure of the airway and the discount.The trachea should not be too long, because the air duct is too long and it can be very stressful, causing breathing difficulties and so on.If you need to move the long tube air breathing apparatus in the process of construction, be careful not to pull the gas supply line. 3. The respirator should be properly protect long tube long tube on mobile gas source, avoid gas long tube contact with sharp, sharp Angle, corrosive medium or drag with coarse material produce friction, prevent puncture, scratch, scratch gas supply pipe.In case of contact with corrosive medium, clean water should be cleaned and dried immediately, such as damaged or damaged, should be replaced immediately. Guarantee period: 10 years.

Enquiry Now