Paraffin Remover/Inhibitor

1 sku

Paraffin Remover/Inhibitor

Technical parameters

1. Appearance; Uniform liquid;
2. Closed flash point≥15℃;
3. Condensation point≤-15℃;
4. Paraffin inhibiting rate≥20%;
5. Paraffin dissolution rate≥0.025g/min.

Executive standard

Q/SH1020 2192-2013

Supply capability

Brand : JINTEFU

Guarantee period : 10 Months from the date of acceptance.

Inquiry Now
BYA9205E polyacrylamide (grain powder)

1 sku

BYA9205E polyacrylamide (grain powder)

Technical parameters

Anion
1.Molecular weight (1 million): 16-20.
2. Degree of hydrolysis (%):13-15 3. Solid content (%): ≥88
4. Water insoluble (%): ≤0.2
5. Dissolving rate (minute): ≤40
6. Residual monomer (%):≤0.05 7.Effective range of PH values: 5-14

Executive standard

Corporate Standard

Supply capability

Brand : BOYUAN

Guarantee period : 24 months since the date of delivery

Inquiry Now
BYC8560 polyacrylamide (grain powder)

1 sku

BYC8560 polyacrylamide (grain powder)

Technical parameters

Positive ion:
1.Molecular weight (1 million): 8-12
2. Ion exponent (%):50
3. Solid content (%): ≥88
4. Water insoluble (%): ≤0.2
5. Dissolving rate (minute): ≤60
6. Residual monomer (%):≤0.05
7.Effective range of PH values: 5-14

Executive standard

Corporate Standard

Supply capability

Brand : BOYUAN

Guarantee period : 24 months since the date of delivery

Inquiry Now
BYC8510 polyacrylamide (grain powder)

1 sku

BYC8510 polyacrylamide (grain powder)

Technical parameters

Positive ion:
1.Molecular weight (1 million): 8-12
2. Ion exponent (%):10
3. Solid content (%): ≥88
4. Water insoluble (%): ≤0.2
5. Dissolving rate (minute): ≤60
6. Residual monomer (%):≤0.05
7.Effective range of PH values: 5-14

Executive standard

Corporate Standard

Supply capability

Brand : BOYUAN

Guarantee period : 24 months since the date of delivery

Inquiry Now
Chromium-free Thinner

2 sku

Chromium-free Thinner

Technical parameters

1. Appearance: dark brown powder;
2. Moisture: 8.5% or less;
3. pH value (2% water solution): 2.8-4.8;
7. Apparent viscosity (room temperature) : fresh water drilling fluid: 25 mPa.s or less; brine drilling fluid: 25 mPa.s or less.
5. Apparent viscosity (high temperature) : fresh water drilling fluid: 35 mPa.s or less; brine drilling fluid: 45 mPa.s or less.
6. Viscosity reduction rate (room temperature) : fresh water drilling fluid: 75% or higher; brine drilling fluid: 60% or higher;
7. Viscosity reduction rate (high temperature) : fresh water drilling fluid: 50% or higher; brine drilling fluid: 51% or higher.

Executive standard

Q/MHLHG10-2015

Supply capability

Brand : JINFENG

Guarantee period : 12 months from the date of delivery

Inquiry Now
Bentonite

1 sku

Bentonite

Technical parameters

1. Viscometer 600 r/min readings: 35 or higher;
2. Plastic viscosity/yield value: 1.5 or less;
3. Filtration: 15.0 cm3 or less;
4. 75-residue on sieve: 4.0% or less (m/m).

Executive standard

GB/T5005-2010

Supply capability

Brand : HUATONG

Guarantee period : 24 months from the date of delivery

Inquiry Now
WH-2 Weighthing Spacer Agent

1 sku

WH-2 Weighthing Spacer Agent

Technical parameters

1、Appearance: Flowbility powder or particles;
2、Water content ≤10%;
3、Fineness (0.425mm sieve), ≤10%;
4、Initial consistrency( Bc) ≤30;
5、Thickening time(min)/80℃,46.5Mpa,45min ≥60;
6、Density difference(g/cm3 )≤0.05;
7、Compression strength(Mpa)/80℃,normal pressure,24h ≥7; The ingredient of the cement in the table is: G class: cement, pre-made dusting agent: 5%, W/C: 0.44, water quality: tap-water (BWOC)

Executive standard

Q/CPOCL 0230-2017

Supply capability

Brand : OCL

Guarantee period : Be kept away from moisture and possible damage of the packages in transportation. Storage life time is two years.

Inquiry Now
GH-Ⅱ High Temperature Retarder for Oil Well Cement

1 sku

GH-Ⅱ High Temperature Retarder for Oil Well Cement

Technical parameters

1、Appearance:Pale yellow powder;
2、Water content,% ≤10.0;
3、Fineness (0.315mm sieve),% ≤10.0;
4、Initial consistrency , Bc ≤30;
5、Mutation value of thickening curve,Bc ≤10;
6、Thickening time/120℃.73.9Mpa.61min Adjustable;
7、Free liquid,% ≤1.4;
8、Compression strength, Mpa/144℃,21Mpa,24h ≥14; The ingredient of cement slurry in the table is: G class:cement 594g + silica sand 208g (160~200mesh) + distilled water 333g+GH-Ⅱ:0.7~2.0%

Executive standard

Q/CPOCL 0240-2017

Supply capability

Brand : OCL

Guarantee period : Be kept away from moisture and possible damage of the packages in transportation, be stored in cool and dry situation. Storage life time is two years.

Inquiry Now
OCL-JA High Temperature Fluid Loss Control Agent

1 sku

OCL-JA High Temperature Fluid Loss Control Agent

Technical parameters

1.Appearance: Black and Brown powder;
2.Fineness(20 mesh screen residue)≤10.0%;
3.pH: 7.0~9.0;
4.Base mud, API filtration: 15~20ml;
5.Add agents, API filtration,ml ≤10.0;
6.API filtration, (450℉/16h rolling), added agents≤11.0ml;
7.HTHP filtration, (450℉/16h rolling), added agents≤35.0ml

Executive standard

Q/CPOCL 0409—2016

Supply capability

Brand : OCL

Guarantee period : 24 months from the date of delivery

Inquiry Now
G33S Fluid Loss Control Additive for Oil Well Cement

1 sku

G33S Fluid Loss Control Additive for Oil Well Cement

Technical parameters

1. Appearance: white or light grey fluidity powder or granules;
2. Water content ≤ 8.0%;
3. Fineness (0.315mm after screening) ≤ 15.0%;
4. Initial consistency (80℃.46.5Mpa.45min) ≤30Bc;
5. Thickened linear: normal;
6. 40Bc ~ 100Bc time ≤40min;
7. Water loss (80℃.6.9Mpa.30min) ≤150ml;
8. Free liquid ≤1.4%;;
9. compressive strength (102℃.21MPa.24h) ≥14MPa 。 Formula of slurry: 800g of grade G cement, 352ml of tap water, 1.2%G33S according to the amount of cement.

Executive standard

SY/T5504.2-2013

Supply capability

Brand : OCL

Guarantee period : Within 24 months after production

Inquiry Now